Learn how to pass the exam in your first two attempts. Learn the strategies on how to extract composite design from given disjointed integrated implementation plan to finish our mock labs in six hours. Learn the concepts, configuration, caveats and troubleshooting required to pass the CCIE-Voice Lab

Course Description
This course is completely focused on students passing the exam. The Course covers all the topics that a student will be tested while giving the exam. This course very heavily focused on labs – and the lectures focused toward clearing concepts and providing insight to various caveats that one can encounter when implementing design. In addition to passing the exam this course will also make you knowledgeable in Cisco’s best design practices to have an edge within your organization.
Course Delivery Methodology
This course is spread over one month/till real exam date and is divided into four phases:
- Phase 1: Instructor Led 5 day on-location (See brochure for 5 day bootcamp. By the end of the first week candidate attains the following: solutions under various scenario and strategy to successfully finish the lab in eight hours.
- Phase 2: This phase starts on Monday for two weeks of the following week after on-location bootcamp week. During these two weeks every alternate day candidate practices full eight hours lab remotely form his home or office. Student is given only eight hour to finish the lab. Every lab is proctored by Instructor and detailed debriefing is provided before the start of next full eight hour lab. By the end of these two weeks students should be able to finish eight hour lab with different scenarios with ease and confidence. We provide full gear that is needed at your home to fully simulate testing of your configuration as if you are testing in real exam environment.
- Phase 3: Student practices full lab twice every week for a maximum of 4 weeks.
- Phase 4: Just before the final exam date 3 days 24x7 access to the rack is provided with options to load labs at different configuration stages
- Phase 5: Student practice full lab once a week till next attempt
Course Benefit
This Five Step bootcamp provides you structure and intelligence and prepared you in a structure manner to help you pass the exam in minimum attempts. While attending the course you will identify the areas where you need to practice more without wasting your time in figuring small but important things on your own.
Why Take CCIE-Voice Bootcamp from Convergent Communications, Inc.
- Strategic hand-holding
If you are an experienced IP telephony engineer who needs fast-paced, hands-on experience with strategic hand-holding to pass the exam.
- Voice-Specialization
We specialize in voice – so we do only voice Bootcamps. You are with the experts in voice technology so you are guaranteed to pass.
- Instructor Advantage
This course is designed by the highly rated CCIE Voice Instructor with many years of design, implementation and audit experience in Cisco’s unified communication. Read some comments about him.
- Lab-book
We provide lab books with solutions and as a part of our Bootcamp. The lab book will not only help you passing in lab exam but could also be used a design reference document for IP Telephony installation.
- Pass Guarantee
To pass the exam you need practice and reinforcement of concepts retaking the bootcamp is free for one year.
Prerequisites
This course addresses advanced topics in depth and lab exercises are written at an expert level. Therefore, students must have taken one of the following classes, or have commensurate work experience: This course is not for the novice student. The Boot Camp is designed for people who are:
- Already CCVP® certified AND/OR
- Have passed the CCIE® written test (highly recommended) AND/OR OR
- Have 2+ years of mid-to-high end Cisco® networking experience.
Lab - Course Content
The labs on the following topics will follow after lectures on the topics. A student typically will able to work one full lab at least twice during 5 days session.
Implement and Troubleshoot Campus Infrastructure and Services
Implement and Troubleshoot Endpoints
- CUCM SCCP Endpoints
- CUCM SIP Endpoints
- CUCME SCCP Endpoints
- CUCME SIP Endpoints
Implement and Troubleshoot Voice Gateways
- T1/E1 - PRI, CAS
- H323,MGCP,SIP, H323 RAS, IP-IP Gateway/CUBE
Implement and Troubleshoot Call Routing Policies
- Route Patterns and Dial-peers
- Digit Manipulations and Translations
- Class of Services
- Route Selection Preference and Redundancy
- Mobility and Single Number Reach
Implement and Troubleshoot High Availability Features
Implement and Troubleshoot Media Resources
- CODEC Selection and Flexibility
- Conference Bridges,Transcoder
- Music-on-hold
- Media Resources Preference and Redundancy
- Other CUCM Media Resources
Implement and Troubleshoot Supplementary Services
- Call Park,Call Pickup,Barge,Callback
- Other Supplementary Services
Implement and Troubleshoot Other CUCM Voice Applications
- Extension Mobility, IPMA,
- Other CUCM Voice Applications
Implement and Troubleshoot QoS and CAC
- L2/L3 classifications and policing
- L2/L3 Queuing mechanisms
- L2 LFI
- RSVP and CAC
Implement and Troubleshoot Messaging
- Cisco Unity Connection
- Cisco Unity Express
- Call Routing and Handling
Implement and Troubleshoot Cisco Unified Contact Center Express
- Advanced Configuration
- Script Customization
- Redundancy
Implement and Troubleshoot Cisco Unified Presence
- CUCM Presence
- Cisco Unified Presence Server Integration
Labs - Equipment
Dedicated pod equipment
- Six 7960g IP phones
- 1 Softphone
- 1 Cisco IP Communicator
- 1 analog phone
- 1 ATA telephony adapter
- 1 Dedicated router with FXS, FXO & Serial interfaces
- 1 Dedicated router with HDV-T1, Serial interfaces, EtherSwitch module and PVDMs
- 1 Dedicated router with E1, Serial Interface, PVDMs
- 1 Catalyst 3550 PWR switch
- 2 Call Manager Server
- 1 Unity server
- 1 Cisco Unity Express Module
Shared pod equipment
- 1 Catalyst 6000 switch with T1, Sup-2 and powered Voice Ethernet modules and 6608 blades
- 1 VG248 gateway
.

|